Equipment
Q&A: The truth behind Bryson DeChambeau’s new Avoda irons from company founder Thomas Bailey
![](https://www.golfwrx.com/wp-content/uploads/2024/07/BrysonAvodaGolfIrons.jpg)
During the week of the Masters, news broke that Bryson DeChambeau was using 3D-printed irons from a relatively unknown company called Avoda Golf.
DeChambeau fired an opening-round 65 at Augusta National using the irons, sending the equipment world into a frenzy trying to figure out who the company is, and what’s different about the irons. Information about the irons, however, wasn’t so easy to find. No one really knew much about Avoda or his new iron designs.
Then, ahead of the 2024 U.S. Open at Pinehurst, GolfWRX.com got its first in-hand look at the irons, and DeChambeau provided a public explanation of the flight-correctional “bulge” that the irons have on their faces.
DeChambeau went on to win the U.S. Open using the bulge-faced 3D-printed irons, but we still didn’t know much about the irons themselves.
Until now.
Recently, GolfWRX.com spoke to Thomas Bailey, founder of Avoda Golf, to find out more about the company, and DeChambeau’s mysterious irons. Enjoy our full Q&A with Bailey below!
Andrew Tursky, GolfWRX.com: So what is Avoda? How did the company get started in the industry?
Thomas Bailey, founder of Avoda Golf: Originally, I just wanted to make myself a set of golf clubs. That’s the truth. So that’s a year ago to date of Bryson winning the U.S. Open.
It’s been a crazy year.
I wasn’t quite happy with what I was looking for from a club and what was available on the market. I played around with a lot of the same-length products for a while. I got to the point where I was grinding the heads myself, taking heads and grinding them away to get the weights I wanted, to get them the appearance how I wanted. And I got pretty dialed in on a set I wanted over a two-year period. It just felt like it had been mauled by a bench grind.
So we were using raw heads, from Kyoei, and taking them down to weight. When I say we, that’s myself and Mike Schy, Bryson’s long-time coach from out at Dragonfly Golf Club in California. We were just grinding away golf clubs, seeing if we could create the ultimate club for what I wanted; and we got it. It just felt like it had been attacked by a bench grind.
So the mission then came in to make it presentable. My brother actually worked in the firearms industry and had a lot of supplier and manufacturer relations, so he worked on finding me a manufacturer who would be happy to put together the clubs for the specs I wanted. And we got there. We went through a number of suppliers and manufacturers to try and get to the point of what we wanted. We got it and had a prototype set come in around October last year, which was spot on. It was exactly what I wanted.
The goal was when I got that set in was to maybe make 50 sets and sell them, and fund my own golf career and my own golfing habits.
So right around that time, Bryson was coming back into town. He just had a win and shot 58 with the new driver in the bag, and he wasn’t happy with irons. They didn’t complement what he’d got right with the driver. The driver had more onset with more bulge to it. The swings he was making with that and having great success off the tee just didn’t work when he went to an iron. So he was saying say he would be fighting his iron play, fighting a left miss if he made the swing he wanted to, and then fighting a right miss to compensate for it. And that would then leak back into the driver to where he’d be missing with the driver, as well. He knew he needed new irons in the bag.
I know him and Mike Schy had explored a few options to try and find someone to do the irons. Right around that point, I told Mike that I’d been working on my own set of irons, that we could always explore doing something for Bryson, as well. And that’s kind of where it started. It’s like, well, nothing to lose. Let’s go for it. Bryson was in town in September, testing some irons and stuff again, having the raw Kyoei’s and grinding them down, getting the appearance he wanted.
He was on the bench grind, as well, and they got a head, and then the conversation started around putting bulge into an iron.
Mike goes, “Well, why don’t we test bulge on an iron?”
And Bryson asked, “Can we do that?”
And it was like, well, let’s find out.
So, he actually went into the academy where he’s got his workshop and started grinding away the toe on the Kyoei heads to try and put a little bit of curvature to it.
Wait, Bryson himself was on the grinding wheel?!
TB: Bryson was on the grinding wheel shaping the club to how he wanted them to look.
We actually had my partner’s dad, he was welding up the back of the club to give him extra weight to play with on the grinding. So it was a right interesting process, but he got it down to the shape he wanted, and then they started grinding. Mike went back into the academy and started grinding away some other toe section to get some curvature on the face to start testing the bulge-face idea, and found out very quickly when he was hitting them.
![](https://www.golfwrx.com/wp-content/uploads/2024/07/BrysonFaceBulge-1.jpg)
GolfWRX’s in-hand photos of Bryson’s 5-iron at the 2024 U.S. Open
Bryson went back to hit them and said, “Yeah, this is it. This is what we need to test.”
So, I set about making two identical heads – 7-iron heads – to the specs he wanted to see weight-wise and the width of the head he wanted to see. And they were CNC forgings to start with. So we had a flat head, or flat face, and then we did an identical club with a curved face, so we could hit them, start getting some numbers, and seeing what the difference is between them. And immediately, it was a night-and-day difference on the mishits, and just the overall performance of the club. It was more than just the mishits, so we knew we needed to put it into a full set.
He had very specific requirements he wanted to see in terms of the width of the head, the appearance from the top line. He liked the thicker top line. He liked the wider blade. When you start doing that, the head weight goes through the roof, so it couldn’t be a one-piece forging. It had to be hollow-body, which also had the advantage of reducing the spin rate, which is something he’d been struggling with for a while.
So we went about putting together the first full prototype set, which came in, we had it completed around end of January this year. He did some testing with it, took it to Mayakoba, had it in the practice rounds there. He decided not to put it in play just because we overdid the face curvature to begin with, to where we’d actually see the opposite miss, not the ideal. And then we went out making another prototype round, tidying up some of the aesthetics on it a little bit, but, again, dialing in the face curvature.
![](https://www.golfwrx.com/wp-content/uploads/2024/07/AvodaBrysonIrons.jpg)
Bailey says Bryson prefers irons that have thicker top lines, wide faces from heel-to-toe, onset, and a square, symmetrical-looking face (as much as possible when there’s a curve) / Photo credit: Avoda Golf
They arrived the week before the Masters. We strongly believe we were still in a prototyping phase there, and did not expect them to be in play at The Masters. So when we found out Tuesday at the Masters that they were going in play, we went, “Uh, right.”
So him switching into the irons at the Masters was news to you, too?
TB: It was, well, there was some stuff that was going on leading up to that. He had them. He was in testing with them a week and a half before, and he took them to Miami, with the full intention of playing them in Miami.
We sent some stuff off for USGA testing, because, again, we’re still in prototyping at that point. So we sent them off. We wanted to get them tested just in case he did put them in play. We had a couple of groove issues that had to be sorted with the 3D-printing process, just some inaccuracies in the groove. His manager, Connor (Olson), over in Florida, was working hard on fixing them over the weekend before The Masters, and then we had them re-tested on the Monday.
Half the set was good to go, but we needed to get another set over there to fix a couple of clubs. So I get a call on Monday afternoon of Masters Week. I’m on the West Coast, in California, and I get a call at 4:30 in the afternoon from Connor saying we need the other set here, right now. And I’m thinking, “How am I getting this other set for you anytime soon?” And if it was Wednesday, it would have been too late for him to put them in play.
So, luckily, we rushed over to UPS. The guy said that the out-of-state overnight had already gone. We’d missed it, but he put the address in, and said we’ll see if we can get it out on the first shipment in the morning. And when I’m putting the address in, he goes, obviously, reading out the address in Augusta, and he goes, “Oh, Augusta. You going to the Masters.”
And I said, “Yeah, these are Bryson’s golf clubs.”
And he’s like, “You’re kidding me.”
Luckily, he was a golfer.
He goes, “You’re kidding.” And I’m like, “No, these are legit Bryson’s golf clubs. We need to get them there.”
So they ended up rushing them out to the truck, luckily getting them on the truck, and they made it to Augusta at 7:00 a.m. the next morning. So Connor did some work on them, and then they got approved to be used midday on Tuesday. But when we had the issues come back just before the Miami event for LIV, he didn’t put them in the bag there. So we kind of thought, right back to the drawing board. We’ll go again, get ready for the next one. But then it was a miracle to get them ready by Tuesday, we just didn’t see that coming. So yeah. And then they were in the bag.
That’s such an unbelievable story.
TB: Yeah. It’s pretty crazy.
Crazy. I mean, it seems like, you know, there was a lot of stuff going on behind the scenes during the week, but we didn’t really know what was happening, because he didn’t publicly come out and say everything. It’s truly unbelievable.
TB: And then having the balls to put that set in play on Tuesday of the Masters. I mean, he’d been practicing with it for a week and a half, so he knew it was good, and he was adamant he wanted to play it. So, obviously, we were gutted originally when it came back that we had the grooves issue that needed to be fixed. And then obviously to get it fixed in time. It was kind of an emotional roller coaster for us all, including him.
So with all that going on, the fact he put them in play and then goes out and shoots at opening 65 was pretty incredible to see. Then, obviously, everything went from there.
All of a sudden, it’s like, “Who’s Avoda?”
A lot of emails coming in, and a lot of interested parties.
Yeah I mean, I was scrambling. For my job, I have to keep up with the latest equipment, all the custom stuff on tour, and then all of a sudden he comes out with these. It’s like, uhh, I know absolutely nothing about these! I’ve never heard of them. I don’t know what to say!
TB: Yeah, that was funny. So, yeah, I mean, we registered the company end of last year, and the intention was for me to make myself a set of irons I was happy with, and, it will result in creating a really, really good product and a lot of interest straight away when we had people testing it.
So I thought, “OK, let’s get in 50 sets and sell fifty. Let’s see if we can build this thing to a 1,000 set a year business.” And, yeah, we smashed it a lot quicker than we thought we would. And, obviously, we cannot be more grateful to Bryson for giving us the opportunity to get it going. It’s accelerated us 5-10 years ahead of typical business growth. So yeah, it’s been pretty unbelievable. So it’s all systems go now, and getting people in the position to handle it.
Fortunately, I’ve had a lot of people around me at the time who knew I was working on this equipment and had made comments like, “If this works and this is this is a good product, we want to be there. We want to support it, and help grow the business.”
So when the clubs went in play, I sent text messages to every one of those parties: “It’s happening. Get ready.”
What an exciting moment for you and the company. So when did the 3D-printing aspect of this come in?
TB: So the 3D printing purpose of that was just for rapid prototyping. So, originally, it was CNC, the first test. And then because he needed a hollow-body head to achieve the visuals he wanted, and then all the specs he wanted, we obviously had an option of creating a mold to cast it, CNC-ing it in two pieces, or 3D printing.
3D printing gave us the quickest option. We were testing a whole new element to golf, adding curvature on an iron, and speed, with the limited time of an off-season.
LIV, fortunately, giving him a longer off-season was great. If it was the PGA Tour, I think, well, I don’t know how we would’ve done it. We’d still be in testing, just because of how limited time there is to do that. So 3D printing gave us the option to rapid prototype, get clubs in within a few weeks to test. So, I mean, we really did go from the first full set…design work started late November, and then by late January, we had the first full prototype set.
So without the ability to 3D print that, we wouldn’t have got it done in that time frame, so it allowed us to get it done.
Where are these heads coming from? Like are you 3D printing them in-house? Are you ordering from a third party?
TB: We have an international manufacturer, so it’s third party. We do all the design work – we have a designer that’s doing that for us – and then we outsource the manufacturing. It’s been a pretty crazy process, and we’re learning a lot very quickly.
So how does it work with the consumer product? How is that working right now? How can people buy sets? What is the market saying about those? What is the feedback you’ve seen in testing when it comes to amateurs? Because I know Bryson was talking about his swing speed and how it helps him, but, you know, the consumer audience doesn’t swing it like Bryson. So, like, what have you seen with the translation there?
TB: So the products that are available for purchase right now is that initial set I put together. So I put two sets together initially, which is what we’re calling our combo-length set. I played same length for a long, long time. I’m 5-foot-9-inches with shoes on, so I’m not the tallest player. And then I’ve got freaky long arms. So, for me, I’ve always had to play my clubs slightly on the shorter side. I love the advantages of the same length set, however, playing a shorter 4-iron when it’s already shorter wasn’t helping me that much. So I needed to make the 4-iron, and the 5-iron, where I didn’t see the distance gapping dropping off. I needed to make them a little bit longer. So that’s where kind of the grinding the golf clubs came in, getting on the bench grind, taking some weight out so I could make them longer. That’s where that originally happened. So I had to set this combo-length set. Same length to the 8-iron, then progressively getting longer through the 7, 6, 5 and 4 iron.
So that’s the initial product we put together, and did the testing on. Then we released a same-length as well, because it was still requested, the same-length product. And there wasn’t really any, at the time, there isn’t a same-length forged product available, like a truly one-piece forging for the same-length market. So we wanted to provide that, as well. So we had the same-length set the whole way through, and then the combo-length set.
So that’s what’s available for purchase for the market right now. The testing on those, from what we’ve seen, just being able to bridge the gap between variable length and same length, that hasn’t been done yet. We’ve seen people who swore that they would never go to a same-length club, who are now using combo lengths, where they’re same-length from the wedge to the 8-iron, and they’re loving it. And then we’ve also seen people who swore to same-lengths, who would never go away from the same length, but did maybe struggle with a longer wedge, or struggle with speed on the 4-iron, again, going into that combo length set, so it’s really bridged the gap between the two.
We’re calling it “removing the disadvantages of both,” and just taking the best of both, and putting them into one set. So those are the sets that are available to purchase right now. The specific Bryson one is a 1-of-1 set that’s done just for him. He has the only set of that, because it’s such a specific product to him. He plays super upright and the head weights are very unique. Obviously, the face, as well the hollow-body.
My goal has always been to create a product that helps people get better. That was the one that helped him get better. I believe in the custom fitting approach, as well. I don’t plan to sell a club for the sake of it. Like, yes, there’s a massive demand for someone to purchase a specific set just like his, but it would be more just for the sake of hitting the Bryson Club, you know, as opposed to actually a club that the consumer can get better by using.
Right, right. What’s your playing background? Like, were you a designer before? Were you a player before? A professional?
TB: Bit of everything. So, I played college golf, packed in college golf after two years to try and pursue full-time golf, so I went back to the UK to pursue full-time golf. Had some injuries straight off the bat, golf swing related. So in an effort to try and get myself healthy, get myself back playing, I kind of saw everyone, did everything, and just wasn’t quite getting the results and help I needed.
And then I kind of had to dive down the rabbit hole of figuring things out for myself. Got some good advice from coaches like George Gankas along the way. He actually gave me some good information around how the body can set up, how the body can move to reduce the stress on the body. So driving down that rabbit hole actually got myself healthy again.
And then there’s a lot of other people in professional golf that are also injured at top amateur level. I had people coming to me saying they struggle with the same problems I had, golfing related. And that led me into the coaching route. So I coached full-time for about 3-4 years. Had some success in that. I coached a guy out of injury named Laird Shepherd. Coached him out of injury to winning a British amateur, and then ended up coaching a few guys out on the European Tour pretty quickly.
I always still wanted to play, so in the back of my mind, it was like, right, yes, I learned everything to try and help myself get better. I’ve got to continue to pursue my dreams of playing. So I got back playing pretty much full-time golf, came out to the U.S. the beginning of 2022 to see Mike Schy to actually build up a set of golf clubs. And then, one thing led to the next, and it kind of got me down the equipment rabbit hole, and that resulted in a major-winning set.
Going down the equipment rabbit is quite an accurate statement…
TB: Yeah, I’m always asking, “Why?” You know? I’m like, why why why? I’m that annoying kid that says, “Yeah, but why?”
I know Bryson is always saying why, too. So you guys linking up makes so much sense.
TB: It worked quite well. There’s a lot of things that we like to see that are similar in a golf club, as well, so that helps. It allowed me to go away and do the design work knowing that I’m looking for a similar thing, as well. I think the struggle that maybe he’s had in the past, and I can’t speak for him on this 100%, but he has an idea of what he wants to see in a club. He takes it away to someone, and they put what they want to see in a club. And it has to work for the mass consumer. The club that he’s playing, the clubs that these guys are all playing, it has to still be available to the mass consumer. So it has to have the element of being able to be used by everyone. Well, now he has the opportunity to create his set.
So when we did the first run of design work and he said what he wanted to see in a club, it was like, okay, let’s do exactly that, and let’s come back with exactly that. And then if he if he wants to make adjustments from there, he’s making adjustments on what he wants to see. So there’s no, like, fighting in the sense of what I want see in the club. If this is what you want to see, that’s what we’re going to design.
And I know he alluded to it a couple times, but is it a progressive bulge that’s going on through the set? So the 9-iron isn’t quite as curved, 7-iron’s a little more curved, and then 5-iron has the max curve? Is that correct?
TB: Yeah. Okay. So the 5-iron, his being 17 degrees in loft and him swinging a 5-iron faster than most people swing a 3-wood, it’s got to have some curvature on it. It’s got a good amount on it, and then progressively tapers off to being nonexistent. So it tapers out to his pitching wedge to where it’s minimal and then becomes flat through his wedges.
And that’s not what the consumer is necessarily buying, right?
TB: No, our products that are available are flat-faced. They are traditional one-piece premium forging. The advantage of ours are more based around how the set’s put together in terms of the length, the weighting, the shaft options, the customization on that, as opposed to the face curvature. Yeah. Right now, the face curvature is just specific to him.
OK, OK. You’re sitting on an absolutely unbelievable story here. It’s so cool from a gear perspective. A lot of things have been coming together very quickly, and of course he goes and wins the U.S. Open with them in the bag. How are you handling things on the production side?
TB: We’ve been labeled as a DTC brand straight away off the bat. We didn’t have an opportunity to be anything else. Things seemed to accelerate so quickly. So right now, we are working. Obviously, the demand’s been huge. People have been calling. We’re receiving hundreds of phone calls, fitting centers asking if they have our clubs. So we’ve got an awesome demand for people wanting to have our fitting kits and be able to offer our equipment.
I believe in that room more than anything, having someone be able to go and test the club. And if they test the club and they decide they don’t want to go with our club, great. We need to do better, and we need to bring out a better product. We’re pretty confident that when they test it, and go through our fitting system, that they will get a very, very well-fitted club that they will have a lot of success with. So getting out to a custom fitters to offer that option to people to go test.
And if we did have that in place from that first week at the Masters, yeah, business would be 10x what it is right now, but, obviously, we were very unaware that we would be in that position so quickly. I mean, we were we were on the fourth month of, or maybe even the third month at that point, of really actually having a full set. So, yeah, it’s accelerated very quickly, but we’re fast learners, and we’re going to deal with the demand. But getting out to custom fitting centers is our number one priority right now, so people can actually go test, and actually have that experience.
I definitely agree on the custom fitting aspect. Well, I’ve taken up way too much of your time, and those are all the questions I have for now. I feel like we cleared up a lot, though. Congratulations on all the success so far, and we look forward to hearing more from you next time.
See Bryson DeChambeau’s Winning WITB from the 2024 U.S. Open here
- LIKE125
- LEGIT26
- WOW15
- LOL5
- IDHT0
- FLOP2
- OB1
- SHANK3
Whats in the Bag
Tommy Gainey WITB 2024 (July)
![](https://www.golfwrx.com/wp-content/uploads/2024/07/IMG_6421.JPG.7c90eb713efe0293d0e811ecd11babb0.jpeg)
- Tommy Gainey WITB accurate as of the John Deere Classic. More photos from the event here.
Driver: Callaway Paradym Ai Smoke Max D (10.5 degrees)
Shaft: ’24 Fujikura Ventus Blue 6 S
3-wood: Callaway Rogue ST Max D (16 degrees)
Shaft: Project X HZRDUS Smoke Red RDX 60 TX
Hybrid: Callaway Apex (20 degrees)
Shaft: Aldila Rogue
Hybrid: Callaway Apex (23 degrees)
Shaft: Aldila Rogue
Irons: Callaway Rogue Pro (5-PW)
Shafts: Project X 6.0
Wedges: Callaway Jaws MD5 (50-10S, 56-08C, 58-08C)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Odyssey Backstryke
Grips: Lamkin Crossline
See more in-hand photos of Tommy Gainey’s WITB here.
- LIKE4
- LEGIT0
- WOW2
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK2
Whats in the Bag
Jason Day WITB 2024 (July)
![](https://www.golfwrx.com/wp-content/uploads/2024/07/Screen-Shot-2024-07-08-at-12.01.22-PM.png)
- Jason Day what’s in the bag accurate as of the John Deere Classic. More photos from the event here.
Driver: Ping G430 LST (9 degrees)
Shaft: Mitsubishi Diamana WB 63 TX
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Mitsubishi Kuro Kage 80 X
7-wood: TaylorMade Stealth (21 degrees)
Shaft: Mitsubishi Kuro Kage 80 X
Irons: TaylorMade P790 (2), TaylorMade P770 (4-PW)
Shafts: KBS Tour Hybrid Prototype 105 S+ (2), True Temper Dynamic Gold X Seven (4-PW)
Wedges: Cleveland RTX 6 ZipCore Tour Rack (52-10 MID, 56-10 MID), Titleist Vokey Design WedgeWorks (60)
Shafts: True Temper Dynamic Gold X Seven
Putter: TaylorMade Itsy Bitsy Spider Limited
Grips: Golf Pride Tour Velvet Cord
Ball: Bridgestone Tour B X (with Mindset)
Check out more in-hand photos of Jason Day’s WITB here.
- LIKE4
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
News
Highlights from the Wilson Golf Product Testing and Fitting Experience at Pinehurst
![](https://www.golfwrx.com/wp-content/uploads/2024/07/IMG_5419.jpeg.42a9c75b14883604eacdceb7c2eb25ad.jpeg)
All new from Wilson Golf this year are Staff blades and CB irons, Dynapower Forged irons, Staff Model ZM wedges, a new golf ball, the RB Utility iron that was released just a few weeks ago, and the company’s own club fitting technology called Wilson Fit AI.
Yeah, it’s been quite the first half of the year for Wilson Golf. Wilson is serious about establishing themselves as a major player in the golf industry. They’ve made new hires, bringing on Markus McCaine (by way of Cobra Puma) as the Head of Global Marketing. Willie Mack, Padraig Harrington, and Kevin Kisner (to name a few), are playing their products on Tour. As we mentioned earlier, they’ve released a ton of new products. But, with all of that being said, how do these new products really stack up?
That’s where we come in. Wilson Golf wanted to reach the hardcore golfer. The equipment junkie. The person who tries everything to find the right fit for optimal performance. They weren’t looking for someone who already had Wilson products in the bag, who would have attended this trip and predictably said great things about their newest line of products. They wanted to prove how Wilson Golf, the brand, and their new products, can truly compete with the major golf manufacturers. With four lucky GolfWRXers in tow, we headed to legendary Pinehurst to meet Wilson Golf’s team of product experts, to test (and get fit) for the full 2024 lineup of Wilson clubs — and play not-yet-open-to-the-public Pinehurst No. 10! The four WRXers — @TLUBulldogGolf, @TM golf guy, @Shilgy, @Olson12— enjoyed a once-in-a-lifetime experience in North Carolina thanks to Wilson.
Members on Wilson Fit AI
TM golf guy: “The AI experience was super cool. 3 swings and it fit me basically exactly into what I expected.”
Shilgy: “The new Ai fitting tool is legit. First answer a few questions and then there is a fitting iron that measures everything. It’s almost scary how easy, and accurate, it is. Started me with a shaft that was too light but based on contact it changed to 115g DG. About as expected. I was fit into the CB with the Dynapower forged as the 5 and 6 iron.”
First impressions on the Staff Model and Dynapower irons
Olson12: “After warming up, Ed had me hit a handful of shots. It took maybe five or six shots, and we decided it was enough. Of the six shots, I hit four pretty well, one perfectly, and one really bad one. The app spits out recommendations based on all the data it collected and gives you both a steel and graphite option. On the graphite side, it went straight to the Steelfiber 110s, so that was the first one we tried. Ed built up a 7-iron in the Wilson Staff CB with the Steelfiber 110s, and we were off to the races.”
“I currently play a Titleist T100/T100s combo set with Nippon Modus 120x shafts. I bought this used set from a local shop after bouncing around a few different sets. (Thank God for the 90-day playability policy.) We’ve all heard the standard saying, “you want 1k spin x the number of the club.” For me, I’ve never even come close to getting 7k with my 7-iron. I’ve always hovered around 5500 and just learned to play with the rollout. My first few shots with the Staff CB were 7400, 7600, and 7100 with the Wilson Model X ball. Nice high cut, landed soft, PERFECT. Didn’t need to hit any other combos.”
TM golf guy: “I am currently playing i230s, and am generally happy with the performance. I had a feeling I would wind up with the Dynapower Forged, but I went in with an open mind to see what was suggested. After getting my numbers, Ed put together a Dynapower Forged with the UST Recoil Dart 105 F4 (stiff). It didn’t take me more than a few swings to know this was the set for me. I’ll do a formal review with side by side with my i230s later after I get them back and get more time with them, but I think these are going to be gamers. I was able to move them either direction, and they felt better than the i230 based on my limited experience so far.”
TLUBulldogGolf: “The MBs flat out perform, if you want that classic look they should be on your shortlist to try, they nailed the shape and the sole design and turf interaction were just what I expect out of a blade. The options to combo with the CB and new utility should appeal to anyone after that classic look with performance.”
Shilgy: “First swings warming up on the range and I could feel the difference, in a good way, between a properly built set and more mass produced. The balance of this set is fantastic. I’ve always been partial to heavier shafts and heads but the T150 always felt too head heavy to me. The balance on this Wilson set is perfect.”
“Suffice it to say both the CB’s and Dynapower irons were quite good today. Hit it solid and you will get the same result every time….miss it a bit and you’ll still get a very playable result.”
First impressions on the Staff Model ZM wedges
Olson12: “I currently play 50, 54, 60 Vokey SM9 wedges but decided to give the 58/6* a whirl, and I’m glad I did. I mentioned to the staff earlier that I never use my 60 for anything longer than 50 yards. I’ve never felt comfortable with a full swing lob. Going to the 58* gives me more confidence on full shots but was still able to hit all the chips and bunker shots I normally hit with my 60*.”
“Guys… These are fully forged wedges for $150. I just ordered my three Vokey wedges a few months ago for like $600. What the hell, man! If you are in the market for wedges, do yourself a favor and just give them a shot. Nice traditional shape and a super soft feel. Not too clicky but still gives audible feedback on mishits.”
TM golf guy: “The Staff ZM wedges were something I was really interested in as I loved the head shape, and the feel and performance didn’t disappoint. They have a really nice shape to them, and the sound and feel is also excellent. I’m a big fan of the 60° that I got. The grind really allows for a lot of versatility around the greens as well. My only regret here is that I didn’t get the Staff gap wedge instead of the Dynapower one.”
TLUBulldogGolf: “The wedges are really solid as well, I feel like I can flight them with ease and they spin like crazy.”
“I have the 60-06 and it’s similar to a Vokey T grind, maybe a touch less demanding. The 56-10 plays very similar to a Vokey S grind.”
First impressions on the utility irons
Olson12: “I’ve played Srixon & Ping Utilities for a while now. I recently gave up the Crossover and went back to a 3 hybrid because the offset was just not working for me. Since the club was just announced today, we had just the stock HZRDUS Black shaft in both the 3 and 4 iron. I hit the 3 and realized it’s been a really long time since I hit a long iron. It took a few swings, but I started to find my groove. Minimal offset, satin finish, and a good-looking topline. This thing is going to compete with the big boys. Hell, @TLUBulldogGolf was getting 150mph ball speed when hitting it off of a tee.”
TLUBulldogGolf: “The utility is the real deal, just seems to want to go straight. A little longer heel to toe than my T200, and it just feels easy.”
The utility surprised me, I knew it was good at my last range session but it seems to come off lower despite having more loft than my T200. I hit it over the green from 240 on a par 5 which shocked me. The stock HZRDUS 4G stays with me and seems to be a good match for my irons.”
TM golf guy: “This utility is stupid good. The first swing I made I hit rather toey, and it flew straight as an arrow. Off the tee it’s a more penetrating flight than my Srixon, but still has good height. Like @TLUBulldogGolf said, it really wants to go straight. Definitely a winner.”
GolfWRX Members on Wilson Golf:
TLUBulldog: “They want to get everything on the golf side right.”
“I came away super impressed with what Wilson is doing and the direction they are taking the brand.”
“I’m hoping this (and their overall strategy) can up their visibility because the new product is legit.”
Olson12: “I’ve been really impressed with the quality of the Wilson product. What stands out the most is the people behind the scenes. This group of people is IMPRESSIVE. They love golf, they are competitive, and they want to compete with the best of the best. I’m thankful to be part of their story, and once we get the full set and get a chance to play them out in the wild, I’ll be able to give a more thorough breakdown.”
TM golf guy: “They are a group of super passionate people who absolutely love what they do, really have a lot of great ideas, and are a really cool group of people to talk to (they also know their way around a golf course!). They were incredibly open to feedback, and were also very candid about their thoughts on things as well. The people a company chooses to represent them says a lot about the company, and Wilson has picked an incredible group. I think Wilson has an extremely bright future ahead of them, and they’ve certainly made a fan out of me.”
Shilgy: “We all definitely need to add Wilson golf to our must play equipment. You’re definitely doing yourself a disservice if you don’t at least try them out and with the new AI fitting tool every fitter out there can be a Wilson expert fitter.”
![](https://www.golfwrx.com/wp-content/uploads/2024/07/IMG_3621.jpeg.bfceb5df3c168bc4469415c6da9c0f25-e1719863417436-600x347.jpeg)
Shilgy, Lindsey Lasater, TM golf guy, Markus McCaine
One final thought
If you’re in the market for a new ball, a hidden gem emerged during this trip. Our members were impressed with the new ball from Wilson. Coming from the Chrome Tour X and TP5, Olson12 stated that the feel of the X around the greens was “pretty damn good.” While TLUBulldogGolf shared, “I’m liking the Model X. Very natural transition as a V1X player.”
We’re looking forward to diving even deeper into the trip and what Wilson has to offer over the next few weeks. In the meantime, don’t hesitate to follow along in the forum.
- LIKE48
- LEGIT6
- WOW3
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK3
-
News2 weeks ago
Experts on understanding ground force and how shoes can impact your golf game
-
Equipment3 weeks ago
Miura launches new forged wedge series
-
19th Hole7 days ago
‘You’re right, we’re always wrong!’ – Sergio Garcia receives warning during Open qualifier
-
19th Hole3 weeks ago
Tour pro says Rory McIIroy needs to replace caddie Harry Diamond following U.S. Open collapse
-
News20 hours ago
Highlights from the Wilson Golf Product Testing and Fitting Experience at Pinehurst
-
19th Hole3 weeks ago
‘If Steve Williams was Rory’s caddie…’ – Tiger Woods’ ex-coach highlights key moment in Rory McIlroy’s U.S. Open collapse
-
19th Hole2 weeks ago
The golf-related tweet that has led to Dave Portnoy’s Twitter account being locked
-
Equipment3 weeks ago
TaylorMade releases Milled Grind 4 Raw TW Grind wedges
ANDRE
Jul 9, 2024 at 5:23 am
It’s a pity to have each irons, beyond the 8, with different length.
With swing speed in between 80 an 95, and depending on the angle of attak of the golfer and dynamic loft you can have just the lowest loft iron longer. Much better for consistencey…
Bruce Ferguson
Jul 4, 2024 at 6:21 pm
So, I suppose this will be a common fitting option some day. “Custom bulged to suit your swing”.
ANDRE
Jul 9, 2024 at 3:25 am
Bulge on irons faces will make a very small difference, however only for golfers with a very high swing speed such as Bryson DeChambeau
Golf Doc
Jul 4, 2024 at 2:18 am
…..and the USGA and R&A just pushed the acceptance of the bulge ‘n roll irons through the system jut like that?
Daniel B
Jul 3, 2024 at 10:32 am
So no plans to bring the bulge set to retail?
henry
Jul 3, 2024 at 3:29 pm
wondering the same… not releasing the bulge set to retail, wut??
Han Y
Jul 3, 2024 at 8:53 pm
omg same here… please release the bulge
pi
Jul 4, 2024 at 7:36 pm
Yeah, jeez… club weight and length? That’s like normal fitting, unless they grind the head down to your specs. Good luck knowing/feeling that as an amateur..
The ‘Bryson set’ only may keep them making big bucks, rest is for the very few that(think they) can make custom head grinding work..